← Back to 14 AWG Gauge Speaker Wire Cable
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation - GEARit
GEARit 14 Gauge In-Wall Speaker Wire CL2 CCA White 200 ft

14/2 Audio Speaker Wire 14 Gauge CCA - CL2 Rated for In Wall Installation

5.03 reviews

SKU: GI-SPKR-14AWG-CL2-CCA-WH-100C2

14 AWGCCA2-conductor100–200 ftFull specs ↓
$46.99 $36.95 SAVE 21%

Length: 100 Feet

100 Feet
200 Feet
Estimated arrival: Nov 26–Nov 28

visaamerican expressapple paydiscovergoogle payklarna-pay-latermasterpaypalshopify pay
  • Lifetime warranty
  • Free shipping on orders $25+
  • 30-day money-back guarantee
Which length do I need?
  • 3–6 ftReceiver to front speakers on the same console or shelf
  • 10–15 ftCenter channel or front speakers across a TV wall
  • 25–35 ftRear surrounds in a typical living room
  • 50 ft +In-wall, ceiling or outdoor runs; consider a bulk spool

Tip: measure the path the wire will follow, not the straight line, and add 10–15% for slack.

Description
  • 14 GAUGE IN-WALL SPEAKER WIRE - GEARit Speaker Cable copper wires come in 2 conductor stranded copper wire designs. Suitable for in wall, in ceiling, attic, basement, and other office indoor home speaker setups. Suitable for 12V wire gauge (12 volt wire gauge), but max voltage of 30V.
  • COPPER CLAD ALUMINUM WIRE (CCA) - Solid bulk speaker wires made of CCA are copper clad wire construction for high quality sound. GEARit CCA Speaker Cables provide true surround sound and high end audio sound wire experience without breaking your budget.
  • SURROUND SOUND SPEAKER WIRE SETUP - Our thick copper wire and speaker wires are perfect for most in wall home theater sound system setup, subwoofer, tower speakers, bookshelf speakers, center channel, home theater, radios, loudspeakers, and more. Made compatible with Klipsch, Sony, Onkyo, JBL, Yamaha and other speaker systems.
  • SOUND WIRE WITH POLARITY - GEARit 14 Ga Speaker Wire copper wire cables come with colored PVC jacket for easy polarity identification. Typically, red speaker wire (light color) is positive and black speaker wire (dark color) is negative.
  • FOR IN WALL, IN CEILING SPEAKERS - Our GEARit CL2 speaker wire cable comes in 100ft, 200ft lengths and white colored trailer wire. Search for GEARit 14 AWG Speaker Cables to find all our 14 ga speaker wires. All GEARit indoor in wall speaker copper wires come with a limited lifetime warranty.

Specifications

Built to spec.

Gauge14 AWG
ConductorCopper-clad aluminum (CCA)
Conductors2-conductor
Length100 Feet, 200 Feet
BrandGEARit
WarrantyLifetime warranty

Best for

When to choose 14 AWG

Home theater 5.1 / 7.1 systems with runs of 50–100 ft. The most common choice.

  • Budget-friendly for short indoor runs
Check your run length

Why this wire

Made for clean installs and clear sound.

14 Gauge CL2 in-Wall Speaker

14 Gauge CL2 in-Wall Speaker

14 GAUGE CL2 IN-WALL SPEAKER WIRE - This 100 ft 14/2 speaker wire has two color-coded conductors and a CL2-rated jacket for in-wall and in-ceiling audio installations. The flame-retardant jacket resists fraying and environmental wear while remaining remarkably soft and flexible.

Copper-Clad Aluminum CCA Construction -

Copper-Clad Aluminum CCA Construction -

COPPER-CLAD ALUMINUM CCA CONSTRUCTION - This CCA speaker cable 100ft features an aluminum core with copper cladding, lighter and more cost-effective than pure copper, providing a lightweight, flexible, and budget-conscious alternative to pure copper cable for supported indoor audio installations.

Easy to Measure, Cut & Identify Polarity

Easy to Measure, Cut & Identify Polarity

Sequential foot markers printed on this 14 AWG speaker wire 100ft help measure long cable runs and cut the length needed for your project. Red and black color-coded conductors make it easy to identify positive and negative polarity when connecting speakers, amplifiers, and AV receivers

Easy to Cut, Strip & Connect

Easy to Cut, Strip & Connect

Copper-Clad Aluminum CCA Construction -

Copper-Clad Aluminum CCA Construction -

Complete the install

Pairs well with

Buyer's guide

Not sure about gauge? Two questions decide it.

How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.

1Pick the gauge

Gauge picker

Tell us the run. We'll size the wire.

50 ft
Amplifier power per channel
Recommended 14 AWG

The home-theater sweet spot for 5.1 / 7.1 setups.

Shop 14 AWG speaker wire

·Or use the reference table

GaugeBest run lengthBest forShop
10 AWG150 ft+Subwoofers, whole-home, large outdoorShop →
12 AWG100–150 ftHigh-power amps, long runsShop →
14 AWG50–100 ftHome theater 5.1 / 7.1Shop →
16 AWGUnder 50 ftBookshelf, rear surroundsShop →
18 AWGShort jumpersLow-power, jumpersShop →
  • CL2 jacket for in-wall and in-ceiling runs
  • CL3 jacket for outdoor or direct-burial runs
  • Marine wire for boats, docks and salt air
  • Step up one gauge if you're unsure

2Pick the conductor

OFC vs CCA: which conductor fits your install?

Recommended · OFC OFC for home theater.

Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.

Shop OFC speaker wire
SpecOFC · Oxygen-free copperPickCCA · Copper-clad aluminumPick
ConductorSolid copper strandsAluminum core, copper skin
ResistanceLowestHigher than OFC
Best run lengthLong runs, 100 ft+Under 50 ft
Power handlingAny ampLow to mid power
Best forHome theater · in-wall · outdoorBudget DIY · car audio
  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
C
Christopher

Protective casing, although diffucult to pass thru a smalk opening that was already passing overhead fronts, is safe to pass thru walls and structures. The wire itself is overall average, but superb at this price point. I highly recommended this 14 guage wire for all but sub wiring. The 14 gusge cross-section allows for easy electron flow. You can buy your expensive conductor wire in 16 guage to match performance, but you will pay thru the nose.

A
Anonymous

Works

D
Dean B.

Is one of the stores you wish you have found along time ago. Just what I needed to set up my theater . Highly recommended and will always buy from here. Thanks

Product Overview

The 14/2 Audio Speaker Wire is a 14 gauge CCA wire designed for in-wall installations. It is perfect for home theater setups, providing high-quality sound while being budget-friendly.

Key Benefits

  • In-Wall Rated – CL2 rated for safe in-wall installations.
  • Copper Clad Aluminum – High quality sound at an affordable price.
  • Versatile Use – Compatible with various speaker setups.
  • Easy Polarity Identification – Colored PVC jacket for positive and negative wires.
  • Limited Lifetime Warranty – Ensures long-term reliability.

Who This Product Is Best For

This product is ideal for homeowners and audio enthusiasts looking to set up in-wall or ceiling speakers. It is compatible with a variety of speaker brands and systems.

Common Questions About This Product

What is the maximum voltage this speaker wire can handle?

The speaker wire can handle a maximum voltage of 30V.

Is this speaker wire suitable for outdoor use?

This wire is designed for indoor use, specifically for in-wall and ceiling installations.

Can I use this wire with any speaker brand?

Yes, this wire is compatible with most major speaker brands including Klipsch, Sony, and JBL.

Buying Considerations

When choosing speaker wire, consider the length you need and ensure it is rated for in-wall use if applicable. Look for features like polarity identification and warranty for added assurance.

FAQ

Speaker wire questions, answered.

How do I choose the right length?

Measure the path the wire will actually follow, around furniture, along baseboards or through walls, then add 10–15% for slack. If you're between two lengths, go longer.

What gauge speaker wire do I need?

Under 50 ft, 16 AWG is fine. For 50–100 ft or higher-power amps, step up to 14 AWG. For runs over 100 ft or subwoofers, use 12 AWG. In-wall installs need a CL2 or CL3 jacket.

Can I run this speaker wire in walls?

Wire rated CL2 or CL3 is made for in-wall and in-ceiling installation. Check the rating in the specs above and on the jacket.

Is OFC better than CCA?

Oxygen-free copper has lower resistance than copper-clad aluminum, which matters most on long runs and at higher power. CCA is a budget option for short indoor runs.

Do I need banana plugs?

No. Bare wire works on any speaker terminal. Banana plugs make swaps faster and prevent fraying.