13% off
- Lifetime warranty
- Free shipping on orders $25+
- 30-day money-back guarantee
Which length do I need?
- 3–6 ftReceiver to front speakers on the same console or shelf
- 10–15 ftCenter channel or front speakers across a TV wall
- 25–35 ftRear surrounds in a typical living room
- 50 ft +In-wall, ceiling or outdoor runs; consider a bulk spool
Tip: measure the path the wire will follow, not the straight line, and add 10–15% for slack.
PREMIUM OXYGEN FREE COPPER – The GearIT Pro Series OFC Oxygen Free Copper Speaker Wire Cable is meticulously crafted with high-stranded conductors to elevate your listening experience in both home theaters and car audio setups. Experience premium sound quality like never before.
UL CL2 RATED FOR CUSTOM INSTALLATIONS – Ensure the utmost safety with the GearIT Pro Series UL CL2-rated speaker wire, designed for seamless in-wall installation or pairing with banana plugs, spade tips, or bent pin connectors. Connect your speakers to your A/V receiver or amplifier effortlessly with GearIT Pro Series speaker wire, guaranteeing both safety and performance.
ADVANTAGE OF OFC (OXYGEN FREE COPPER) – Here are the facts about OFC Oxygen Free Copper vs CCA Copper-Clad Aluminum. With OFC wire you will have increased conductivity to carry more current to your amplifier. It will also help reduce the strain on the vehicle's electrical system which OFC oxygen free copper is highly recommended when you are installing speaker wire in the car. Other than the sound and conductivity improvement the OFC speaker wire will much higher corrosion resistance and improved heat absorption over the CCA speaker wire.
HIGHEST QUALITY MATERIAL AND TIER 1 MANUFACTURING PROCESS - The cable is made of OFC Oxygen Free Copper, ensuring high fidelity sound quality and providing maximum conductivity and durability without paying the additional cost. The product goes through many states of testing to ensure the highest performance and reliability.
PRO SERIES LIFETIME GUARANTEE – We stand for the highest quality product and customer satisfaction. If you are not happy with the product in any way we offer an easy return policy. All products come with our top-rated lifetime warranty service.
Specifications
Built to spec.
| Gauge | 12 AWG |
| Conductor | Oxygen-free copper (OFC) |
| Conductors | 2-conductor |
| Jacket rating | CL2 — rated for in-wall and in-ceiling runs |
| Length | 50 Feet, 100 Feet, 250 Feet |
| Brand | GEARit |
| Warranty | Lifetime warranty |
Best for
When to choose 12 AWG
High-power amps and long runs of 100–150 ft, where you want minimal voltage drop.
- Safe to run inside walls and ceilings
- Pure copper for lower resistance
Why this wire
Made for clean installs and clear sound.

UL Listed & CL2 Rated for in-Wall Use

Clear, Reliable Audio with 12/2 OFC

Measure, Plan & Cut with Less Waste

Flexible for Faster Installation

Built for Real-World Audio Projects
Complete the install
Pairs well with
Buyer's guide
Not sure about gauge? Two questions decide it.
How long is the run and how much power the amp pushes. Use the picker, then choose the conductor.
1Pick the gauge
Gauge picker
Tell us the run. We'll size the wire.
·Or use the reference table
| Gauge | Best run length | Best for | Shop |
|---|---|---|---|
| 10 AWG | 150 ft+ | Subwoofers, whole-home, large outdoor | Shop → |
| 12 AWG | 100–150 ft | High-power amps, long runs | Shop → |
| 14 AWG | 50–100 ft | Home theater 5.1 / 7.1 | Shop → |
| 16 AWG | Under 50 ft | Bookshelf, rear surrounds | Shop → |
| 18 AWG | Short jumpers | Low-power, jumpers | Shop → |
- CL2 jacket for in-wall and in-ceiling runs
- CL3 jacket for outdoor or direct-burial runs
- Marine wire for boats, docks and salt air
- Step up one gauge if you're unsure
2Pick the conductor
OFC vs CCA: which conductor fits your install?
Longer runs to surrounds and higher receiver power benefit from pure copper's lower resistance.
Shop OFC speaker wire| Spec | OFC · Oxygen-free copperPick | CCA · Copper-clad aluminumPick |
|---|---|---|
| Conductor | Solid copper strands | Aluminum core, copper skin |
| Resistance | Lowest | Higher than OFC |
| Best run length | Long runs, 100 ft+ | Under 50 ft |
| Power handling | Any amp | Low to mid power |
| Best for | Home theater · in-wall · outdoor | Budget DIY · car audio |
FAQ
Speaker wire questions, answered.
How do I choose the right length?
Measure the path the wire will actually follow, around furniture, along baseboards or through walls, then add 10–15% for slack. If you're between two lengths, go longer.
What gauge speaker wire do I need?
Under 50 ft, 16 AWG is fine. For 50–100 ft or higher-power amps, step up to 14 AWG. For runs over 100 ft or subwoofers, use 12 AWG. In-wall installs need a CL2 or CL3 jacket.
Can I run this speaker wire in walls?
Wire rated CL2 or CL3 is made for in-wall and in-ceiling installation. Check the rating in the specs above and on the jacket.
Is OFC better than CCA?
Oxygen-free copper has lower resistance than copper-clad aluminum, which matters most on long runs and at higher power. CCA is a budget option for short indoor runs.
Do I need banana plugs?
No. Bare wire works on any speaker terminal. Banana plugs make swaps faster and prevent fraying.


