GEARit Cat7 Outdoor Flat Ethernet Cable 3ft Black Cat 7 Direct Burial

It didn't work. I bought this cable specifically for an outdoor installation. I know the cable was faulty because I replaced it with a cable that I had that wasn't outdoor rated and that one did work. I tried plugging and unplugging several times. The most disappointing part is it was a pain to install, then I had to take everything apart and install a cable that wasn't rated for the environment until I can get the proper cable.

Works perfectly, value fir money.

Excellent Cat 7 works great.

Works as advertised

I’m a fan of the flat cables, they just end up looking so clean when hidden. The cable seems like it’s tough, so I don’t think it will break apart anytime soon. Just be careful bending, it is copper inside..it will bend to any angle easy, it’s definitely flexible. But this is connected to my projector and it has yet to go offline.

Used when installing my Eero Pro 7. Wanted a cable that was durable and flat. Ran the cable through a couple walls that I needed the cable to be a little flexible with no issues. Secured with wall connectors. Good speed and the cable was made with quality in mind. Purchased a couple more after installing the first one. Good value for your money and would purchase again and again if the need arises.

I am impressed with the build quality of this cable especially considering its price point. It is easy to install and secure with cable clips, and it is a relief to be off Wi-Fi. During peak traffic times in my neighborhood, I typically achieve 500 Mbps on Wi-Fi, but with this cable, I am getting 800-900 Mbps and a steady upload speed, instead the jittery connection I had before. I will definitely be purchasing more to extend the network throughout the rest of the house.

Very strong and high-quality cable! Recommended for both home and outdoor use.

I won't advise anyone to use this cheap material patch cord.

This GearIT CAT7 Flat 75ft is excellent quality. I was going to prepare my own cabling but this flat style was compelling. It's direct bury so I don't need to hassle with conduit except for one small section that I will later put a protective conduit after I run a ground trench due to potential digging. I was able to run this from an unpowered area of our property to a POE switch indoors. The flat cable style was convenient to continue the run indoors behind molding and under part of an entry safety mat. The jacks on either end are robust and plug and release smoothly. Great product.

ROCK SOLID PERFORMANCE above & below ground, even at below 0High-end, quality manufactured, CAT 7 OUTDOOR RATED 75’ Ethernet Cable is excellent for reliable and worry-free use indoors as well as outdoors in extreme temperatures, direct sunlight, and damp/wet and humid conditions.With its thick yet flexible and flat BLACK PVC jacket, this one is also rated for DIRECT BURIAL.For installation ease take note that the RJ45 end connectors are greater than ~15.5 mm across at their widest point, plan the cables installation path accordingly.With this cable, I verified stable, high-speed performance with a network testing device. When used with POE devices, the correct voltage was transmitted the full length. When testing this outdoor-rated cable, I subjected it to below 0 degrees Fahrenheit for several days before performance testing.I use this cable inside my home, through the unconditioned attic, above exterior porch ceilings and extending inside of soffits for POE cameras and security devices plus suspend with tensioning cable overhead to outbuildings (vs direct burial).5 Stars from me.

I have an outdoor AP that was installed using standard CAT5e, non-outdoor rated. I realized this wasn't ideal at the time, but didn't have anything better to use. The GearIT CAT7 outdoor flat ethernet cable was exactly what I needed!For this installation, I have a hole drilled through a block wall. Unfortunately, whoever drilled the hole did not make it even to the inside of the house, and did not drill the holes big enough. Fortunately, the flat design of this CAT7 cable meant that if I could get the head of the cable through first, I would then have room to reinstall all the other cables without having to drill the hole bigger. Major victory!Additionally, this AP install is POE and next to quite a bit of electrical and telecommunications equipment, as shown in my pictures. I wanted the shielding provided by this CAT7 cable to reduce interference as much as possible. Furthermore, the UV shielding will help this cable last longer outdoors in the sun... the existing CAT5e cable was already starting to fade and become brittle on one side.Overall, I recommend this cable for anywhere you need a high-quality flat cable, whether that is indoors or outdoors.

This arrived rolled up with twist ties keeping it rolled then inside a sealed sturdy plastic bag. I have a digital tester that said this cable was defective, but yet I could verify each circuit with continuity, so maybe my tester isn’t designed to test these higher frequency cables.Anyway, I decided to run it between our main internet cabinet to an outside tool shed.The tool shed was already successfully connecting its own broadcasting access point as a mesh to an outside access point closer to the house, but it could delay showing three cameras connected to the toolroom access point, so I wanted to see if a direct connect (with this cable) to the tool room and then into the access point (instead of wirelessly meshing) would solve the camera feed delays. Those delays aren’t bad, but when you are remote and checking in the delays are a nuisance when everything else is much more instant.The cable was easy to lay out from point A to point B to make sure it was long enough. It was. So then I did my best to get the flat cable untwisted — I think I got most twists out for the first routing from our main internet cabinet to the side outside of the house closest to the tool shed, which adjoins our carport.When plugged in — our remote toolroom AP came right up (& 6 wireless devices connect out there including 3 remote cameras) but then I later noticed that our internet bandwidth had dropped significantly, like 30%.I thought it was a fluke — maybe lots of people on our circuit, but after having dropouts all over the house, for hours, I finally unplugged this cable.After rebooting everything — the fiber in, the router, the switches — things got back to normal & it was again robust.I thought maybe it was wired on the ends incorrectly which might make it less compliant.I couldn’t get to this immediately but several day later I had a block of time so I went to both ends, cut off their molded plugs & put new correctly wired jacks on the ends, & plugged into those jacks pre-tested jumpers to the AP on the one side in the tool shed and to the network switch on the other side.Again, this cable took down our system.I reverified my jack wiring met correct standards we used all over our system — wiring correct — so it was definitely something within the cable.I’m not sure where the problem is, whether the cable could be cut & try 1/2 its length on both ends to see if I could isolate the problem to one or the other side. Then cut lengths to try to get to the shorted spot? It seems a great waste to throw away a nice big cable like this — but you have to worry you could spend a whole day trying to isolate the (?) defective spot (?s).For now we went back to wireless mesh to that tool room & it works adequately & our full network works normal without drop outs.Might be better to get a new cable from another company.For now it has wasted my time too much already, & cost me 2 jacks I did not need to install.I would not recommend this nor would I order it again.

I picked up this outdoor-rated Cat 7 Ethernet cable to restore internet connectivity to the back of my workshop. I used to have a Cat 5e cable there, but it eventually failed. Replacing it was a bit of a hassle, so I figured if I was going to put in the effort, I’d upgrade to Cat 7. This cable offers higher speeds and less interference compared to Cat 5 or the Wi-Fi I was using temporarily. The speed boost was noticeable right away.I chose this GearIT cable specifically because it’s advertised as being suitable for direct burial. While it doesn't have the official certifications for direct burial (something us network engineers look for), the jacket and overall construction are solid enough to protect the section that runs outside my workshop and connects to a switch in a weatherproof enclosure. If it starts to deteriorate in the coming months, I'll update this review.Overall, it’s a good cable – I just wouldn’t bury it shallow, in high moisture soil, or where it freezes.

I have to admit, I didn't have a ton of need for a cat7 cable, but being that I have almost all my equipment on cat5 I was more intrigued than anything. I got this through the vine program, but at around $10 that's not a terrible price for the length and better than most big box stores, and right in the range I'd expect from a place without huge markups like monoprice that I'd otherwise go to.The cable seems sturdy and the flat profile was another selling feature to help me replace one with a little cleaner run. It is supposed to be rated for outdoor use but it will never see that from me so I can't speak to that.Other than that, it's an ethernet cable. I'm not a huge power user or anything for it to totally matter. The big thing is that it works, no thrills no frills no headaches, it just works. I did run it from a pc to a router and don't notice any real difference overall in normal usage. I did run some speed tests and there were on par with past ones (right at the level I'm paying for from my provider) and nominally a little uptick over one run just before swapping cables, but nothing that couldn't be standard deviation/fluctuation in traffic on the whole. So maybe a tiny bit better, but really regular ethernet, but a quality one.I'd definitely say the cat7 is not necessary for all but the most extreme users, but with no real difference in cost it doesn't hurt to step it up. But it is a brand I'd go with again if I needed another in the future.

The GearIT Cat7 Outdoor Flat Ethernet Cable stands out as a robust and versatile option for anyone looking to upgrade their home or business network. The first thing that struck me was the cable's build quality—it's clear that GearIT has put thought into creating a product that not only performs well but is also built to last.One of the major benefits of this cable is its flat profile, which makes it incredibly easy to install in tight spaces. Whether you're running it along walls, under carpets, or through rafters, the flat design ensures it stays in place without rolling or causing damage. The outdoor-rated jacket adds another layer of durability, making it suitable for a variety of environments, from indoor setups to more demanding outdoor applications.In terms of performance, while the Cat7 standard is more advanced than Cat6, the real-world differences may not be as noticeable for typical home network users. However, the cable's solid copper construction and premium shielding do offer peace of mind, knowing that it can handle higher speeds and more complex network demands if needed. This makes it a future-proof choice for anyone planning to upgrade their network or expand it in the future.The connectors are another highlight—gold-plated for corrosion resistance, they plug in with a satisfying click, ensuring a secure connection. This is a small but significant detail that speaks to the overall quality of the cable. In testing, the cable delivered consistent gigabit speeds, with minimal loss even over longer distances.Overall, the GearIT Cat7 cable is a solid investment for those who want a high-quality, durable Ethernet cable that’s built to handle the demands of modern networking. Whether you’re running it indoors or outdoors, this cable delivers the performance and reliability you need to keep your network running smoothly.

It might not make a difference but I like the structure this cable design puts on the twisted wire pairs. They toss around “Cat 7” but that’s a misnomer. The fine print says Cat 6 which fits with the 10 Gbps and the lengths offered. I’m still trying to get 600 MHz and Nyquist and Fourier congruent as modern cable technology is pushing theory something fantastic. It appears GearIT has a handle on it.The flat design also tends to make for some interesting handling – more predictable. The LLDPE jacket provides more options and is a good choice for the ‘in-laws’ cottage network run. It’s a good cable with decent strain reliefs and connectors.

I had not heard of GearIT before getting this Cat7 cable but I was immediately impressed by the business card that comes packaged with this ethernet cable - it basically says, we don't buy reviews. Instead GearIT does it the old fashioned way - they simply ask you to login to your Amazon account, find your order, and submit a review, no begging, pleading, or cajoling for a positive review, I find that refreshing. The cable I ordered was 3 feet in length, and the cable itself is a flat wire with well-designed connectors (see picture). The cable feels sturdy and the packaging says it’s rated for outdoors use.In getting this Cat7 cable, I will freely admit that I was more curious than anything, as I am not running a high speed data center requiring gigabit throughput, I have a simple home network running off a cable modem and wifi router, with an ethernet switch to increase the number of available ports; one of those ports is an ethernet to Powerline run, to provide “wired” connections to other parts of the house. There are many potential "weak" points in my setup, but I figure the most important run is the one from the modem to the router and then the run from the router to the switch. As the cable I am using for the modem to router was packaged with my new mesh system, I'm guessing it's at least Cat6, while the old cable I had lying around for the router to switch is likely Cat5 and six feet in length. At these lengths, I'm doubtful that length has much impact, so I ran a speed test with the old Cat5 (6') length, then another one right after with the new Cat7 GearIT (3'). The speed test was run from a desktop computer that is connected via ethernet over a Powerline adapter, which connects to the Powerline adapter run off the switch in another part of the house, so is as pure a test of the cable as I can get, no wifi involved.The results: first one with the old cable was 15.86 Mbps download, 7.18 upload (this is at primetime when neighborhood congestion is at its peak; admittedly a better test would have been run at 2 am); the new cable was 15.52 Mbps download, 8.55 upload. To me, that’s pretty much a wash, which was no surprise, just confirms that a short run of cable is not a limiting factor in network speeds. So it works just fine for home use but don’t expect a big change in performance. However if you are looking for a sturdy, high quality flat cable for networking use and don’t mind paying a little more compared to a Cat6, this one should work well.

MY RATING: ⭐⭐⭐I purchased this cable for one purpose; it was listed as "Direct Burial Rated." After receiving the cable, I was dismayed to discover it was unsuitable for direct burial applications. I have designed cable and telecommunications systems for the past 20 years and was a cable installer for ten years. Every installation we design MUST meet standards; the cable must carry certifications; it's not enough to "say" it is direct-burial; it has to be certified by the regulating authority.Let me explain further:Direct Burial: Direct burial cable in the US must be certified by Underwriter Laboratories (UL). UL has three tests the cable must pass: moisture penetration and crush resistance.Requirements::1. Protection against water penetration:a. Outer Jacket Protection: The LLDPE outer jacket is acceptable for preventing water penetration, although HMWPE is more commonly used for low voltage direct bury.b. Inner protection: Outdoor-rated cable must either be gel-filled, also known as 'flooded cable", or the conductors must be wrapped in water-resistant tape. After examination, this cable has neither. Inner moisture protection is required if the outer jacket is nicked, which commonly occurs in outdoor applications. Besides the LLDPE jacket, the inner conductors have no moisture protection; they are foil-wrapped, which only protects against RFI noise.2. Crush Resistance: Direct Burial cable must also have UL-certified protection for crush resistance, officially known in the industry as "Compressive Loading Resistance." Typically, a corrugated inner shield is placed just inside the inner jacket, and this cable has none.3. Fire resistance: Must be PLTC-rated, which includes passing the UL 1685 flame testThere is a vast difference between calling cable "for outdoor use" and "Direct Burial" rated. Outdoor cable requires no UL certification and is typically only protected from moisture penetration. Outdoor cable can be buried if placed in a conduit and buried at the proper depth that meets the NEC standard; however, that does not mean that 'outdoor' cable is 'direct-bury' certified.I rate this cable at three stars. The cable seems superior for indoor applications; the jacket is superior, the pure copper construction can safely transport PoE voltage, and the foil-wrapped conductors provide good protection from EMI. The cable loses two stars for claiming it's direct-bury certified when it's not UL-approved and would not meet the testing standard.